Dual spindle design complemented with 2 Y-axis and 3 power turrets
Workpieces can complete milling, tapping or even composite procedures such as eccentric turning in one jig fixture
By functioning with automatic bar feeder or robotic arm, automatic processing can be realized
Three tool turrets can perform multi-processing, effectively shortening cutting time required
Specification | TMT2000-T2Y2 |
Chuck O.D. | 8" inch |
Bar capacity | Ø65 (Ø51) mm |
X1/X2/X3 axis travel | 230/-/230 mm |
Y1/Y2/Y3 axis travel | ±51/-/±51 mm |
Z1/Z2/Z3/B axis travel | 440/-/440/680 mm |
X/Y/Z/B axis rapid traverse | 30/15/36/30 m/min |
Spindle nose | A2-6 |
Spindle speed | 4,500 (6,000) rpm |
Spindle motor | 18.5/15/11 kW |
Sub-spindle chuck O.D. | 8" mm |
Sub-spindle speed | 6,000 rpm |
Sub-spindle motor | 18.5/11 kW |
Tool capacity | 12 (16) x2 pc |